-31%

Produsent: RADIOLINK

Radiolink R4FGM 4 Ch FHSS Gyro Mini mottaker

Specifications:

 

Channel: 4

Model Application: Car/boat

Control Distance: 400m on the ground

Frequency: 2.4GHz ISM

Spread Spectrum: FHSS 67-channel pseudo random frequency hopping

Antenna Length: 200mm

Operating Current: 30mA (base on power voltage)

Voltage Range:: 4~10.0V DC

RF Power: <10dbm

Channel Resolution: 4096

Compatible Transmitter: RC6GS/RC4GS/RC4G/T8FB/T8S

Size: 25*13*12mm

Weight: 3g

Veil. 420,- Ikke medlem: 290,-
290,-
  • Betal med faktura
  • Betal med kort
  • Delbetaling
  • Vipps
På lager På lager

SKU: RLR4FGM

  • Produktinformasjon
  • Brukermanual

Radiolink R4FGM 4 Channels RC Gyro Mini Receiver for RC Baja RC Short-Course Monster Truck Crawler On-road Drifting RC Car 1/28 mini Long Control Distance for Radio RC4GS/RC6GS/RC4GS V2/RC6GS V2rc receptor

 

Features:

 

4 Channels: Mini size 0.98*0.51inch, light weight 0.1oz, can be use it for 1:28 RC mini cars.

 

Excellent Anti-interference: With pseudo random FHSS algorithm, which makes R4FGM with excellent anti-interference ability, control range up to1300 feet (400 meters) on the ground.

 

Integrated Gyro: built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.

 

Reverse Polarity Protection: Even the polarities are mistakenly connected, receiver not damaged. The power of 4.6~10V supports high voltage servo.

 

Simple Bind and Switch Modes: No need any setting on controller when R4FGM bind with radio, press 1 second to bind. Shot press 3 times within 1 second to on/off Gyro mode.

 

Note:
 

R4FGM rc receiver suitable for Radiolink’s transmitterRC4GS/RC6GS/RC4GS V2/RC6GS V2/T8FB/T8S.

 

How to Match Code With Transmitter:


1. Put the transmitter and the receiver close to each other within 50 centimeters.
2. Turn on the transmitter, then power on the R4FGM.
3. There is a black button on theR4FGMpress the binding button in one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.

 

 Package Included:

  • R4FGM Receiver x 1