Smart batteri 150 watt meter/tester/balancer/discharger

Screen type : 2.6" LCD screen
Voltage: 7.4V~22.2V (Please use voltage divide port)
Receiver battery: 1.2V~8.5V DC
Balance voltage setting: 2.0-3.9V(3.3V default)
Discharge voltage setting range: 3.0-4.2V (3.9V default)
Discharging Current (4.0V/Cell): Approx 450mA
Supports battery pack with JST / RX connector
Discharge power: 150W
Size : 93.5 x 60 x 17 mm
Weight : 71g
Usage:Compatible with Li-Po/Li-Fe 2~6 cell battery or Receiver Battery

Med dette instrumentet kan man til enhver tid ha full kontroll over et batteris tilstand. Utgiftene til dette instrumentet tjener seg selv inn i løpet av kort tid. Sjekker hver enkelt celles tilstand. Lagringsspenning for LiPo batterier bør ligge på ca 3,8 - 3,9 volt pr celle. Utladning max 150 watt med tre belastningspærer tilkoblet. Instrumentets nøyaktighet er en tusendels volt pr celle.

Feature: 

1. Equipped with a large LCD backlit display, it can visually display the battery type, remaining power, total voltage, etc.
2. Support battery capacity detection, voltage balance, built-in resistance, battery discharge, ESC / Servo / PPM test.
3. Helps optimize battery performance and extend the overall battery life by ensuring the balance of individual batteries.
4. Display the estimated capacity and voltage of LiPo / LiFe / Li-ion / NiMH / NiCd battery pack, and quickly check whether the battery needs to be charged before use.
5. Support the wide and narrow frequency servos detection, you can manually test servo rotation, the central position of the servo, the servo automatically swings left and right, and the swing speeds can be adjusted.